JsonHttpClient.ino

Description

This example shows how to parse a JSON document in an HTTP response.

It uses the Ethernet library, but can be easily adapted for WiFi or WiFiClientSecure.

It performs a GET resquest on arduinojson.org/example.json.

Here is the expected response:

{
  "sensor": "gps",
  "time": 1351824120,
  "data": [
    48.756080,
    2.302038
  ]
}

This example uses the Stream interface directly. If you prefer using an HTTP library, please see How to use ArduinoJson with HTTPClient?

Source code

#include <ArduinoJson.h>
#include <Ethernet.h>
#include <SPI.h>

void setup() {
  // Initialize Serial port
  Serial.begin(9600);
  while (!Serial)
    continue;

  // Initialize Ethernet library
  byte mac[] = {0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED};
  if (!Ethernet.begin(mac)) {
    Serial.println(F("Failed to configure Ethernet"));
    return;
  }
  delay(1000);

  Serial.println(F("Connecting..."));

  // Connect to HTTP server
  EthernetClient client;
  client.setTimeout(10000);
  if (!client.connect("arduinojson.org", 80)) {
    Serial.println(F("Connection failed"));
    return;
  }

  Serial.println(F("Connected!"));

  // Send HTTP request
  client.println(F("GET /example.json HTTP/1.0"));
  client.println(F("Host: arduinojson.org"));
  client.println(F("Connection: close"));
  if (client.println() == 0) {
    Serial.println(F("Failed to send request"));
    client.stop();
    return;
  }

  // Check HTTP status
  char status[32] = {0};
  client.readBytesUntil('\r', status, sizeof(status));
  // It should be "HTTP/1.0 200 OK" or "HTTP/1.1 200 OK"
  if (strcmp(status + 9, "200 OK") != 0) {
    Serial.print(F("Unexpected response: "));
    Serial.println(status);
    client.stop();
    return;
  }

  // Skip HTTP headers
  char endOfHeaders[] = "\r\n\r\n";
  if (!client.find(endOfHeaders)) {
    Serial.println(F("Invalid response"));
    client.stop();
    return;
  }

  // Allocate the JSON document
  JsonDocument doc;

  // Parse JSON object
  DeserializationError error = deserializeJson(doc, client);
  if (error) {
    Serial.print(F("deserializeJson() failed: "));
    Serial.println(error.f_str());
    client.stop();
    return;
  }

  // Extract values
  Serial.println(F("Response:"));
  Serial.println(doc["sensor"].as<const char*>());
  Serial.println(doc["time"].as<long>());
  Serial.println(doc["data"][0].as<float>(), 6);
  Serial.println(doc["data"][1].as<float>(), 6);

  // Disconnect
  client.stop();
}

void loop() {
  // not used in this example
}

JsonHttpClient.ino

Description

Source code

Things used in this example

Classes

Functions

Libraries

See also